GL&D Fusion M175DS Woodchipper and Shredder 6″ chipper

The GL&D Fusion M175DS Woodchipper is a 3 point linkage mounted chipper capable of handling material up to 170mm or 6 inches.Chipping is carried out by a 670mm diameter flywheel fitted with four replaceable blades. Material is fed into the flywheel by means of a hydraulically powered roller and pintle belt system. Power for these is provided by the machines on board hydraulic system. As a result, no hydraulic connections are needed to the tractor, only a 540rpm PTO is required.The feed of material into the flywheel is controlled by a “No-Stress” system. This monitors the speed of the flywheel to keep it between two pre-set parameters. As a result, if it’s speed drops below the lower setting, feed to the flywheel is stopped. A 12 volt electrical supply is also required for this system to work.In addition, both Category I and II lift arm connections are provided allowing the machine to be used with any tractor of 45hp and above.In addition, the M175DS also has a tow hitch built into the sturdy frame. Thanks to both this feature and also the feed being positioned at 90 degrees to the tractor it is possible to tow a trailer behind the chipper if required.Outputs of between 14 & 30 cubic metres per hour are possible with the M175DS.For more information and different GL&D Woodchipper in the range here – https://www.agrimarketia.com/product-category/brands/gl-d/GL&D are exclusively distributed by Agri Market Insight and Access Ltd in the UK and Ireland. Please feel free to contact our helpful team if you have any questions by clicking here.