The GL&D Galaxi M225DT Woodchipper is a 3 point linkage mounted chipper capable of handling material up to 225mm.Chipping is carried out by a 820mm diameter flywheel fitted with six replaceable blades. Material is fed into the flywheel by means of twin hydraulically powered rollers. Power for these is provided by the machines on board hydraulic system. As a result, no hydraulic connections are needed to the tractor, only a 540rpm PTO is required.The feed of material into the flywheel is controlled by a “No-Stress” system. This monitors the speed of the flywheel to keep it between two pre-set parameters. As a result, if it’s speed drops below the lower setting, feed to the flywheel is stopped. A 12 volt electrical supply is also required for this system to work.In addition, both Category I and II lift arm connections are provided allowing the machine to be used with any tractor of 70hp and above.In addition, the M225DT has a tow hitch built into the sturdy frame. Thanks to both this feature and also the feed being positioned at 90 degrees to the tractor it is then possible to tow a trailer behind the chipper if required.Outputs of between 15 & 35 cubic metres per hour are possible with the M225DTFor more details on the GL&D Galaxi M225DT Woodchipper, please visit the GL&D website by clicking hereGL&D are exclusively distributed by Agri Market Insight and Access Ltd in the UK and Ireland. Please feel free to contact our helpful team if you have any questions by clicking here.
